A suit jacket is built rather than simply sewn. Shoulder pads, a chest piece, interfacing behind the lapels and a lining all give it shape, and that structure is exactly what an iron tends to flatten. Steam is kinder. It relaxes creases from travel or a long day at a desk without pressing the life out of the cloth.

Here is how to steam a suit jacket properly, so the shoulders stay rounded, the lapels keep their natural roll and the sleeves hang clean. It takes about ten minutes once you know the order.

Before you start: check the label and the cloth

Most suit jackets are wool or a wool blend, and wool responds very well to steam. Linen, cotton and polyester blends steam well too. Velvet, silk and jackets with delicate trims need more care, and anything marked dry clean only can usually still be freshened with steam held a little further away, as long as you keep the fabric moving and never soak it. If you are unsure what a symbol means, our fabric care symbols guide walks through every label.

Many high street jackets are fused, which means the inner structure is glued to the outer cloth. Heat and moisture held in one spot can make that glue lift, which shows as a bubble on the chest or lapel. So the rule is always light, moving passes rather than long blasts.

What you need

  • A clothes steamer. A handheld such as the f20 Handheld Clothes Steamer Pro with Suction is ready in about 30 seconds and weighs 0.92kg, so it is easy to work around a jacket on a hanger. An upright like the f1200 Clothes Steamer Pro gives continuous steam from a 3-litre tank, which suits a whole suit or several jackets in one go.
  • A shaped hanger. A wide wooden hanger that fills the shoulders properly is the single most useful tool here. A thin wire hanger will leave dents.
  • Somewhere to hang it at chest height, such as a door hook or clothes rail.
  • Filtered or distilled water if you live in a hard water area. Our guide to the best water to use in a clothes steamer explains why this helps prevent spitting and marks on dark cloth.

How to steam a suit jacket in 7 steps

1. Empty the pockets and button it up

Take out your phone, keys and anything else that pulls the cloth out of line. Fasten the top button so the front panels sit as they do when you wear it. This keeps the fronts straight and stops the lapels twisting.

2. Hang it on a shaped hanger and settle the shoulders

Put the jacket on the hanger, then gently pull the collar up and back so it sits snugly against the neck of the hanger. Run your hands down each shoulder seam so the shoulder pads rest on the hanger rather than sliding off the ends. If the shoulders are not supported now, steam will set them in the wrong place.

3. Heat the steamer and test on a hidden area

Fill the tank and wait for the steamer to heat. Release the first burst of steam into the air or a towel, away from the jacket, in case there are any drips. Then test on the inside of the hem and check for shine or water marks. On the f1200, start on the lower of its two steam settings for lightweight or delicate cloth. The f20 also has two steam settings, a gentler one for lighter garments and a stronger one for cotton and linen.

4. Steam the body from the bottom up

Start at the back, near the hem, and work upwards in slow vertical strokes, holding the hem lightly so the cloth is just taut. Steam rises, so working upwards keeps moisture out of sections you have finished. Then do each front panel the same way, keeping clear of the lapels for now.

With the f20, the suction draws the cloth onto the steam plate, so you can glide with one hand rather than pulling the fabric tight. On wool, keep the plate moving and use the gentler setting so you smooth the cloth without pressing a shine into it.

5. Do the sleeves without creating a crease

Jacket sleeves should be rounded, not pressed flat with a sharp line down the top. Hold the cuff and let the sleeve hang straight down, then steam in long strokes from the shoulder towards the cuff, turning the sleeve slightly as you go so you cover it all the way round. For stubborn creases at the elbow, a rolled-up towel slipped inside the sleeve gives you something soft to steam against.

6. Treat the lapels and collar gently

The lapel on a good jacket is meant to roll softly from the collar to the top button rather than lie in a hard, flat fold. Never press the roll line. Instead, steam the lapel from the underside and from a short distance, then shape it with your fingers so it curves naturally back towards the button. Steam the collar from behind in the same way and let it settle against the hanger.

7. Let it cool and dry before you wear it

Wool holds steam for a few minutes, and damp cloth creases easily. Leave the jacket on its hanger in a ventilated room for at least ten minutes before you wear it or put it away. This is when the shape sets. In the wardrobe, give it a little space so it is not crushed.

Common mistakes to avoid

  • Holding the steam in one spot. This is how fused jackets bubble and how wool gets shiny. Keep moving.
  • Pressing the lapels flat. It ruins the roll and is hard to undo at home.
  • Steaming on a wire hanger. The shoulders will dent and pucker.
  • Putting it on straight away. Warm, damp cloth creases again quickly.

Steaming the rest of the suit

Suit trousers are different, because most people want a sharp front crease. Steam them hanging from the hem, then use a firm surface or, on the f20, its dry iron mode to set the crease. Our step-by-step guide on how to steam a shirt covers the shirt underneath, and if you wear a wool overcoat over the top, see how to steam a wool coat. Bobbles under the arms or on the cuffs are best removed with a fabric shaver before you steam, not after.

When to leave it to the dry cleaner

Steam deals with creases and freshens cloth between wears, but it does not remove grease, food stains or heavy soiling. If your jacket is stained, has a bubbling chest or needs a full press after months of wear, a good dry cleaner is the right call. Our guide on steamer vs dry cleaning explains where each one makes sense. If you are choosing a steamer mainly for suits, our best handheld clothes steamer for suits guide and the full clothes steamer range are good places to start.

Frequently asked questions

Can you steam a wool suit jacket?

Yes. Wool responds very well to steam because the fibres relax with heat and moisture, then settle back into shape as they cool. Use a gentle setting, keep the steamer moving and hang the jacket on a shaped hanger. Let it dry for at least ten minutes before wearing so the cloth does not pick up fresh creases.

Is it better to steam or iron a suit jacket?

For most people, steaming is better for the jacket itself. An iron presses the structure flat and can leave shine on wool, especially on the lapels and shoulders. Steam relaxes creases while the jacket hangs, so the shoulders and lapel roll keep their shape. Ironing is still useful for trouser creases and shirt collars.

How do you steam a suit jacket without damaging it?

Test on a hidden area first, use filtered water if yours is hard and never hold the steam in one place. Work from the bottom up, steam the lapels from underneath and do not press them flat. Leave the jacket to cool and dry on a wide hanger before you wear it or put it away.

Can you steam a dry clean only suit?

Usually, yes, for freshening and removing light creases. Hold the steamer a little further from the cloth, keep it moving and avoid soaking any area. Steam will not remove stains or grease, so a jacket that is marked or heavily worn still needs a proper dry clean.

How long should you leave a suit jacket after steaming?

Leave it on a shaped hanger for at least ten to fifteen minutes in a well ventilated room. The cloth needs to cool and lose its moisture to hold the new shape. If you put it on while it is still warm and damp, sitting down will press fresh creases into the back and sleeves.


Garment Care