Cashmere is soft, warm and expensive, which is exactly why people get nervous about creasing it, washing it or putting anything hot near it. The good news is that steam is one of the kindest things you can use on a cashmere jumper. It relaxes creases, lifts flattened fibres and freshens the knit between washes, all without the pressure and direct heat of an iron.
The trick is to treat cashmere gently: low steam, no pulling, no pressing and plenty of time to cool. This guide walks you through how to steam cashmere step by step, which settings to use, and the small mistakes that cause stretched cuffs and shiny patches.
Why steam suits cashmere better than an iron
Cashmere is a fine, short-fibred wool. An iron flattens those fibres, can leave a shine on the surface and risks scorching if the plate is too hot. Steam works differently. Warm moisture relaxes the fibres so creases drop out on their own, and the knit fluffs back up rather than being pressed flat.
Steaming also means less washing. Cashmere does not need to be washed after every wear, and each wash takes a little out of it. A quick steam and an airing between wears keeps a jumper looking fresh for longer. If you want the wider picture for all knits, our guide on whether steamers are better for knitwear than irons covers wool, merino and blends too.
Before you start: check the care label
Most cashmere jumpers say hand wash or dry clean, and many say cool iron. A cool iron symbol tells you the fabric can take a little heat, so gentle steam is fine. If the label shows a crossed-out iron, or the piece has beading, sequins or a glued trim, test steam on a hidden seam first or leave it to a professional.
It is also worth checking for stains. Steam freshens a garment, but it will not lift a food mark or make-up, and heat can set some stains for good. Spot clean or wash first, then steam once the jumper is completely dry.
How to steam cashmere in 7 steps
- Fill with the right water. Use fresh water, and if you live in a hard water area, distilled or filtered water helps prevent limescale spitting. Our guide to the best water for a clothes steamer explains why.
- Choose the lower steam setting. Cashmere does not need full power. Start low and only turn it up if stubborn creases will not shift.
- Hang the jumper briefly on a wide hanger. A padded or wide shoulder hanger supports the weight of the knit while you work. Do not leave cashmere on a thin wire hanger, as the shoulders can stretch out of shape.
- Test on a hidden area. Steam the inside of a cuff or the inside hem for a few seconds and check it looks and feels the same once it has cooled.
- Keep the steamer just off the fabric. Hold the head a centimetre or two away and move it slowly from top to bottom. Let the steam do the work. There is no need to press the plate into the knit or pull the fabric tight.
- Smooth with your hand, not the steamer. Once a section is warm and relaxed, use your palm to gently smooth the knit into shape. Watch your fingers, as steam is hot.
- Let it cool and dry flat. Lay the jumper flat on a towel for ten minutes or so before wearing or folding. Warm, damp wool stretches easily, so give it time to settle.
Which steamer to use on cashmere
A handheld steamer is ideal for jumpers, cardigans and scarves because you can move around the garment easily and control how close you get. The f10 Handheld Clothes Steamer heats up in around 45 seconds, weighs 900 grams and has Full Power and Eco modes, so you can keep the output gentle for knits. Fridja lists it as safe for delicate fabrics including silk and cashmere.
If you steam a lot of knitwear and coats, the f1200 Clothes Steamer Pro is an upright steamer with a 3-litre tank and dual steam settings, so you can drop to the lower setting for cashmere and use the higher one for heavier coats. The f20 Handheld Clothes Steamer Pro also has two steam settings. With cashmere, start on the lower setting, test on an inside seam and glide lightly rather than pressing the plate into the knit. You can compare options in our handheld clothes steamers range.
Dealing with bobbles before you steam
Cashmere bobbles, especially under the arms and on the cuffs where it rubs. Steam will not remove bobbles, but it does make a de-bobbled jumper look much smoother. Remove the bobbles first, then steam.
The f40 Fabric Shaver is designed for wool, cotton, cashmere and synthetic blends, runs for up to 45 minutes on a USB-C charge and weighs about 200 grams. Lay the jumper flat, hold the shaver lightly and move in small circles without pressing down. Our guide on how to remove bobbles from knitwear goes through the technique in more detail.
Common mistakes to avoid
- Pressing the steamer into the knit. Pressure flattens cashmere and can leave a shine. Hover instead.
- Pulling the fabric taut. It is tempting with an iron, but warm cashmere stretches. Let it hang naturally.
- Steaming a damp jumper. Wait until it is fully dry after washing, or you will add more moisture than the fibres can handle.
- Folding it straight away. Folding warm, damp cashmere sets new creases. Lay it flat to cool first.
- Storing it on a hanger. Hang cashmere only while you steam it. Fold it for storage so the shoulders keep their shape.
How to keep cashmere looking good between wears
Air a jumper for a few hours after wearing it, ideally flat or over a chair back rather than on a hanger. Give it a light steam to relax any creases and freshen it, then fold it into a drawer. Wash only when it actually needs it, following the label. For party season and gifting, our guide to looking after a Christmas jumper covers washing, de-bobbling and storage, and the same gentle approach works for other delicates such as silk.
Frequently asked questions
Can you steam a cashmere jumper?
Yes. Steam is one of the gentlest ways to remove creases from cashmere. Use a low steam setting, keep the steamer a centimetre or two from the fabric and move slowly. Avoid pressing or pulling the knit, then let the jumper cool flat before you wear or fold it, so it keeps its shape.
Is it better to steam or iron cashmere?
Steaming is usually better. An iron presses the fibres flat and can leave a shine or scorch mark, while steam relaxes creases without direct pressure. If you must iron, use the coolest wool setting, turn the jumper inside out and place a clean cotton cloth between the iron and the knit.
Does steaming cashmere shrink it?
Gentle steaming does not shrink cashmere. Shrinking usually comes from hot water, agitation in a washing machine or tumble drying. Steam adds a little warmth and moisture without rubbing, so the fibres relax rather than felt. Let the jumper cool and dry flat afterwards so it settles back into its normal size.
How do you get creases out of cashmere without a steamer?
Hang the jumper in the bathroom while you shower, as the warm, moist air will relax light creases. Then lay it flat and smooth it with your hands. This works for mild creasing, but a handheld steamer is quicker and gives more even results on cuffs, collars and deeper fold lines.
Can steam damage cashmere?
Steam is safe for cashmere when used gently. Problems come from too much heat for too long, pressing a hot plate into the knit, or stretching warm, damp fibres. Start on the lowest setting, test on a hidden seam, keep the steamer moving and always let the garment cool flat before wearing it.
